Assembled size: 25.5 cm x 21 cm x 11.5 cm / 10 in x 8.3 in x 4.5 in
Packaging
Cardboard Box
Total Pieces
370
Drift Cobra Racing Car - A High-Speed Wooden Puzzle
Build a powerful mechanical model with the Drift Cobra Racing Car, a beautifully-styled wooden puzzle from Ugears. This 3D DIY model features a spring-powered motor, turning front wheels, and a sleek convertible design.
The model is wound by means of a ratchet knob under the chassis. Before winding your 3-D wooden Drift Cobra model racing car, move the air filter that protrudes from the hood toward the windshield, and flip the switch in front of the passenger-side seat into the Lock position (parallel to the door). Now twist the ratchet underneath the car's body. After 6 to 6.5 turns of the knob the spring is fully loaded, and — vroom! vroom! — your racer is ready to roar! Set the gear shift lever, located between the driver and passenger seats, to the desired position (Reverse, Neutral, Drive). To start the model, set it down on a flat surface, slide the air filter forward, and watch your Cobra lay rubber in a spin out (start with the wheels turned to one side), do circles, or speed down the track in a straight line.When the wheels are set in their straight position, the model covers a lot of ground—8 meters or more! Set the wheels in a gentler turn, or put the racer down on a less slippery surface, and watch your Drift Cobra complete two or three full circles.
Key Features:
370 precision-cut wooden pieces
Advanced level difficulty, 9-hour assembly time
Spring-powered motor for high-speed performance
Turning front wheels and opening doors and hood
Perfect for car enthusiasts, DIY hobbyists, and puzzle lovers
Get ready to burn some rubber with the Drift Cobra Racing Car, a challenging and rewarding wooden puzzle model kit! Ages: 14+